RUSTA 624013420101 Gebrauchsanleitung Seite 4

ENG
ASSEMBLY
1. To get started, you need one of Rusta's 2 different start sets (purchased separately):
A. STARTING SET
MANUAL TIMER
Attach the timer and pressure reducer to
the tap.
2. Place the hose over the area you wish to
site your sprinklers. The hose is somewhat
malleable.
3. Take the supplied piercer and attach to the
first point on the hose where the sprinkler
should sit.
a. Lock the piercer in place.
b. Screw down the handle so that the
piercer pierces the hose. It is important
to screw the handle all the way down.
Please use a finger to press against the
lock so that the hose is not squeezed out
at the sides.
4
B. STARTING SET
AUTOMATIC TIMER
Attach the timer and pressure reducer to
the tap.
A B
3a 3b