RND 355-00002 Bedienungsanleitung Seite 3

CAUTION
• Disconnect the test leads from the test points before changing the position
of the function rotary switch.
• Do not expose Meter to extremes in temperature or high humidity.
• Never set the meter in Ω, , ,
• measure the voltage of a power supply circuit in equipment that could result
in damage the meter and the equipment under test.
Symbols as marked on the Meter
and Instruction manual
Risk of electric shock
See instruction manual
DC measurement
Equipment protected by double or reinforced insulation
Battery
Fuse
Earth
AC measurement
Conforms to EU directives
Do not discard this product or throw away.
Unsafe Voltage
To alert you to the presence of a potentially hazardous voltage, when the Tester detects
a voltage ≥30 V or a voltage overload (OL) in V, mV . The " " symbol is displayed.
Maintenance
Do not attempt to repair this Meter. It contains no userserviceable parts. Repair or servicing
should only be performed by qualified personnel.
Cleaning
Periodically wipe the case with a dry cloth and detergent. Do not use abrasives or solvents.
RND 355-00002 AC+DC TRUE RMS INDUSTRIAL MULTIMETER — USER MANUAL
,mA, A function to
3