Westfalia LC1000 Bedienungsanleitung Seite 35

 With the quick connection (7) you can use pole
connection cables with ring terminals or alternatively
the quick clamps (5) and (6).
Simply connect the desired connection cables with the
quick connection.
Attention!
 First connect the quick clamps (5) and (6) with the battery poles
and than plug the power plug into the socket.
 After charging, first unplug the charger from the power mains
before removing the quick clamps.
Built-in Safety Features
With the built-in safety features the battery charger is secured
against misuse and errors. There is no risk of over charging the
battery and the charger will not damage vehicle electronics.
Using
31