Yamaha MusicCast MCX-SP10 Bedienungsanleitung Seite 3

MOUNTING THE SPEAKERS ON A WALL
Follow the procedure below to remove the speaker
stand before attempting to mount it on a wall.
1.
Use a screwdriver to loosen the screws
attaching the stand to the speaker.
2.
Remove the stand from the speaker,
taking care to slide out the mounting
pins that hold the stand to the bottom of
the speaker.
3.
Attach the pads to the rear of the
speaker, as illustrated.
Mounting bracket
Pad
4.
Insert 2 self-tapping screws (diameter:
3.5 to 4 mm) into the wall, 40 mm apart.
40mm
5.
Mount the speaker on the screws by
positioning it so that the screws on the
wall fit snugly into the holes on the
mounting bracket.
Cautions
• This speaker weighs 1.2 kg (2 lbs 10 oz). Do not mount it
on thin plywood or a wall with soft surface material. If
mounted, the screws may come loose from the flimsy
surface and the speaker may fall. This damages the speaker
and may cause personal injury.
• Do not use nails, adhesives, or other unstable materials to
mount the speakers. Long-term use and vibrations may
cause it to fall.
• To avoid accidents resulting from tripping over loose
speaker cable, fix it to the wall.
• This speaker features a magnetically shielded design, but
there is still a chance that placing it too close to a TV set
might impair picture color. Should this happen, move the
speaker away from the TV set.
2
4mm 20mm or more