Intex KOM0541 Bedienungsanleitung Seite 13

CONNECT UPS TO POWER
Connect the power cord, to a verified grounded 3-wire receptacle. Do not power the UPS using a
surge suppressor or power strip. Switch the utility power ON.
CONNECT EQUIPMENT TO UPS
Now connect your load to be protected (computer, monitor etc.) to the AC Output receptacles at
the rear of the UPS.
* Do not connect a laser printer or any non-computer peripherals to UPS outlets.
* Do not connect a surge suppressor, power strip or extension cord to the UPS outlets.
Owner's manual
EN
13