Geutebruck GFD-632/VP-IR Bedienungsanleitung Seite 61

IR DOME CAMERA
1) AREA: To specify MOTION DETECTION area
- Select AREA using the UP or DOWN button. You can select from
area 1~4 position using the LEFT or RIGHT button.
2) DISPLAY: To display MOTION DETECTED area on the video
- Select DISPLAY using the UP or DOWN button. You can select
between ON/OFF using the LEFT or RIGHT button.
(1) ON : display the MOTION DETECTED area on the screen
(2) OFF : disable
3) SENSITIVITY: To setup the motion sensitivity
- Select SENSITIVITY using the UP or DOWN button. You can adjust the motion sensitivity of
a movement from 1~24 using the LEFT or RIGHT button.
(1) 1: most sensitive (highest)
(2) 24: least sensitive (lowest)
24
1 2
3 4
1