Product Specifications; Noise Information; Intended Use - Bosch BL 40 VHR Professional Bedienungsanleitung

bl40_bu1_1609929E39_t.fm Seite 1 Dienstag, 14. Februar 2006 3:14 15

Product Specifications

Construction Laser
Article number
Laser type
Laser class
1)
Working range
Without receiver
With receiver
1) 2)
Levelling accuracy
Rotational speed
Laser beam diameter
1)
at the unit
Batteries
Operating time approx.
Tripod connection
Dimensions
Weight in accordance with
EPTA-Procedure 01/2003
Protection type
Operating temperature
Storage temperature
1) at 25 °C
2) along the axis
Please refer to the article number on the nameplate of your unit since the
trade designation of individual units can vary.
The serial number 15 of your unit for positive identification is located on
the nameplate on the rear of the housing.

Noise Information

Measured values determined according to EN 60745.
Typically, the A-weighted sound pressure level of the product is less than
70 dB(A).

Intended Use

The unit is intended for projecting and checking precise horizontal planes,
vertical lines, alignment lines and plumb points.
1 609 929 E39 • (06.02) T
BL 40 VHR
PROFESSIONAL
0 601 096 703
635 nm, <1 mW
2
To approx. 50 m
To approx. 100 m
<±0.3 mm/m
3 Steps (70–680 RPM)
Approx. 5 mm
2 x 1.5 V LR20 (D)
40 h
1/4" horizontal and vertical
5/8" horizontal and vertical with adapter
150 mm x 120 mm x 140 mm
1 kg
IP 54
(dust and splash water protected)
–5 ... +45 °C
–20 ... +70 °C
English–1