Assembling Your Minilite; Charging; First Ride - Segway miniLITE Bedienungsanleitung

4 Assembling Your Segway miniLITE
1. Slide the steering bar onto to the mounting bracket.
2. Install the two M5 screws. Tighten securely with the included hex wrench.
3. Press the rubber cap onto the steering bar until it snaps in place.
1
2
5

Charging

Do not connect the charger if the charge port or charge cable is wet.
Charge port
Your miniLITE is fully charged when the LED on the charger changes from red (charging) to green
(trickle charge). Close the rubber cap when not charging.
05
3
Open the rubber cap Insert the plug
into the socket
6

First Ride

There are safety risks when learning to ride the miniLITE. You must read the
Safety Instructions and follow the New Rider Tutorial in the App before your first
ride.
For your safety, your miniLITE is not activated at this time and will beep
occasionally after Power ON.
Until activated, the miniLITE maintains a very low riding speed and steering
sensitivity, and should not be ridden. Install the App on your mobile device (with
Bluetooth 4.0 or above), connect to the miniLITE with Bluetooth, and follow the
App instructions to activate your miniLITE and follow the training procedures.
Scan the QR code to download the App (iOS 8.0 or above, Android™ 4.3 or
above).
1 Install the App and register/login.
3 Click "Vehicle"→"Search device" to connect.
Your miniLITE will beep once when the
bluetooth connection is successful.
2 Power ON the miniLITE.
Vehicle N Fans Club Discover Me
06