Totally Wicked D16 Bedienungsanleitung Seite 4

Using your D16 Kit
Filling the D16 Tank with e-liquid:
Grip the base of the D16 tank and
remove the tank from the battery
by unscrewing. Once removed turn
the tank so that the base is at the
top, and unscrew from the tank. Fill
the tank, ensuring that e-liquid is
poured down the side of the central
air tube, and not into the central air
tube. Once filled, reassemble the
tank using the reverse of the above
procedure. Take care not to fill
higher than the white rubber gasket
on the central air tube, as this is the
4
maximum fill level.
Note: Be sure to "prime" the
atomizer head before first use by
dripping a few drops of e-liquid
into the centre, then allowing it to
sit in a tank full of E-liquid for a
few minutes before vaping. This
ensures the atomizer head is fully
saturated with e-liquid.