Totally Wicked BUZZ Bedienungsanleitung Seite 14

Using your Buzz Kit
Note: Only attempt to lock the
atomizer resistance when using
nickel, titanium or stainless steel
atomizer heads in temperature
control mode and ensure the
atomizer heads are currently at
room temperature.
Configuring TCR Mode (M1/M2/
M3):
To configure TCR modes M1, M2
and M3, when the device is powered
off, hold down both the large power
button and the right adjustment
14
button simultaneously until you enter
the TCR configuration menu. Use
the left and right buttons to cycle
through M1, M2 and M3 modes and
single press the large power button
to select the mode that you wish
to configure. Use the left and right
buttons to increase or decrease
the TCR value depending on your
choice of coil material.