Controlling The Temperature - Samsung RS7 Benutzerhandbuch

When you use Power Freeze the energy
consumption of the refrigerator will increase.
Remember to turn it off when you don't
need it and return the freezer to your original
temperature setting.
If you need to freeze large amount of food stuff,
activate Power Freeze function at least 20 hours
before.
Display Off Function
To energy conservation the Panel Display turns off
automatically under the following conditions:
When no button has been pressed, when no doors
are open, or when no Dispenser Lever has been
pushed.
However, the icon indicating your Vacation or Cubed
/ Crushed / Ice Off, will stay on.
When you press a button, open a door, or push
Dispenser Lever, the Panel Display will turn on again.
Except for the Ice Type button, all function buttons
will become operational after you remove your fi nger
from the button you are currently pressing.
CONTROLLING THE
TEMPERATURE
CONTROLLING THE FREEZER
TEMPERATURE
The freezer temperature can be set between -15 °C
(6 °F) and -23 ºC (-10 °F) to suit your particular
needs. Press the Freezer button repeatedly until the
desired temperature is shown in the temperature
display. Keep in mind that foods like ice cream may
melt at -16 ºC (4 °F).
The temperature display will move sequentially from
-15 °C (6 °F) and -23 ºC (-10 °F). When the display
reaches -23 ºC (-10 °F), it will begin again at -15 ºC
(6 °F).
Five seconds after the new temperature is set the
display will again show the actual current freezer
temperature. However, this number will change as
the Freezer adjusts to the new temperature.
DA68-02710R-07.indb 25 DA68-02710R-07.indb 25
When you place the SHELF-BOTTOM instead of
Bottom drawer, the SHELF-BOTTOM is two star
section (All models). The Bottom door guard in
the freezer is two star section.
(RSH7, RS77, RS7528, RS7527, RS54H,
RS57H, RS76 models).
So, the Temperature in the two star sections are
slightly higher than other freezer compartment.
CONTROLLING THE FRIDGE
TEMPERATURE
The refrigerator temperature can be set between 7 ºC
(46 °F) and 1 ºC (34 °F) to suit your particular
needs. Press the Fridge button repeatedly until the
desired temperature is shown in the temperature
display.
The temperature control process for the Fridge works
just like the Freezer process.
Press the Fridge button to set your desired
temperature.
After a few seconds, the Fridge will begin tracking
towards the newly set temperature.
This will be refl ected in the digital display.
The temperature of the freezer or the refrigerator
may rise from opening the doors too frequently,
or if a large amount of warm or hot food is
placed in either side.
This may cause the digital display to blink.
Once the freezer and refrigerator return to their
normal set temperatures the blinking will stop.
If the blinking continues, you may need to "reset"
the refrigerator.
Try unplugging the appliance, wait about 10
minutes and then plug back in.
English - 25
14. 11. 15. 14. 11. 15. 9:16 9:16