Troubleshooting - Korg KAOSS DJ Bedienungsanleitung

KAOSS DJ
is no audio input, you will return to the program
select screen before the auto BPM function has
been completed. If you want to display the
BPM again, press the Tap button.
Specifying the scale
You can assign a scale to the touchpad.
TIP The program determines whether this setting
has an effect. Refer to the operation guide.
1. Hold down the Shift button and press the
Hold button; the abbreviated name of the
currently specified scale appears in the dis-
play.
2. Turn the program/value knob to change the
scale.
3. After you make the change, the program
indication reappears when a certain length
of time has elapsed.
TIP By pressing the Shift button you can make the
program indication reappear immediately.
Specifying the key (tonic)
Here's how to specify the key (root note) of the
scale.
TIP The program determines whether this setting
has an effect.
1. Hold down the Shift button and press the
Tap button; the currently specified key ap-
pears in the display.
2. Turn the program/value knob to change the
key.
3. After you make the change, the program
indication reappears when a certain length
of time has elapsed.
TIP By pressing the Shift button you can make the
program indication reappear immediately.
For some settings, there might be no sound, or
noise might be output.
10

Troubleshooting

Power won't turn on
→ If you connect the KAOSS DJ to your
computer via a USB hub, it might not
power-on because of insufficient power. In
that case, you should connect the KAOSS
DJ directly to a USB connector on the
computer itself, not via a USB hub.
→ There might be a problem with the USB
cable you're using. Check whether the
power turns on with the included USB
cable.
The KAOSS DJ is not recognized as a USB
device
→ There might be a problem with the USB
cable you're using. Try using a different
cable.
→ Check whether there might be a problem
with the USB A port of the computer or
other device where the KAOSS DJ is
connected.
→ The KAOSS DJ might not be recognized if
you use a commercially available long
length USB cable. Even if you're using a
long length USB cable, the KAOSS DJ
might be recognized if you connect via a
self-powered hub; however even in this
case, you should use the included USB
cable between the KAOSS DJ and the
self-powered hub.
Buttons are not operating according to
machine indications
→ The software being used may be incom-
patible with some functions or have
different operations.
No sound is output
→ Make sure that your power amp or head-
phones are connected to the correct jacks.
→ Make sure that the connected power amp
or other equipment is turned on and set to
an appropriate volume.