Inhaltsverzeichnis
Werbung
Using your Curve
Vaping: Press the power button as you inhale. When the button is
held down the OLED Screen will display vaping time in seconds.
Adjusting output level: Output from the battery can be adjusted
by pressing the "up" or "down" buttons momentarily whilst the Curve
battery is switched on. Pressing and holding a button will cause the
output level to sweep automatically through its range in 0.1V steps
until the opposite button is pressed. Pressing the "up" or "down"
button again whilst sweeping will increase the step size to 0.2V then
0.5V. With the supplied BDC atomizer head it is recommended to set
voltage output between 3.3V and 4.0V to suit your taste preference.
8
OLED Screen display: Pressing the power button 3 times in quick
succession will toggle the main display of the OLED Screen between
voltage and wattage. Battery charge level and atomizer resistance
are displayed all the time the Curve is turned on and the screen is
active.
Charging the battery: Remaining battery charge is indicated on
the OLED Screen, and the battery charge indicator will flash when
remaining charge is below 10%. The battery can be recharged using
the supplied USB lead plugged into a dedicated USB port or wall
adaptor. The Curve can be used normally during battery charging.
9
Werbung
Inhaltsverzeichnis
