Herunterladen Inhalt Inhalt Diese Seite drucken

VOLTCRAFT PB-16 Bedienungsanleitung Seite 3

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

OPERATING INSTRUCTIONS
G
POWER BANK "PB-16"
ITEM NO. 1313700
INDENTED USE
This product serves as a mobile spare battery and is suitable for charging the rechargeable
battery of, e.g. a mobile phone/smartphone. The built-in, permanently installed recharge-
able battery is charged via USB. The product has a charge level indicator with 4 blue LEDs.
Furthermore, there is an integrated LED torch.
Always observe the safety instructions and all other information included in these operating
instructions. Please read the operating instructions carefully and do not discard them. If you
pass the product on to a third party, please hand over these operating instructions as well.
This product complies with the applicable national and European regulations. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
PACKAGE CONTENTS
• Power bank
• USB-Y cable
• Operating instructions
EXPLANATION OF SYMBOLS
A n exclamation mark in a triangle indicates important instructions in this operating
manual which absolutely have to be observed.
T he "arrow" symbol is used where special tips and notes on operation are provided.
SAFETY INSTRUCTIONS
P lease read all instructions before using this device, they include important
information on its correct operation. The warranty will be void in the event
of damage caused by failure to observe these safety instructions! We do not
assume any liability for any resulting damage!
W e do not assume any liability for material and personal damage caused by
improper use or non-compliance with the safety instructions! In such cases,
the warranty will be null and void.
• T he unauthorised conversion and/or modification of the product is not permitted
for safety and approval reasons (CE). Never dismantle the product!
• The product is not a toy and should be kept out of the reach of children.
• T he product must not be exposed to extreme temperatures, direct sunlight, strong
vibrations or heavy mechanical stress. The product must not get damp or wet.
I f you see any damage, do not use the product anymore but take it to a specia-
lised workshop or dispose of it in an environmentally friendly manner.
• C aution, LED light: Do not look directly into the LED light! Do not look into the
beam directly or with optical instruments!
• A lso observe the safety and operating instructions of any other devices that are
connected to this product.
• Do not operate the appliance when it is unattended.
• T he housing of the power bank heats up during operation. Make sure that there is
sufficient ventilation; never cover the product!
• M ake sure that the cable connected to the power bank is not pinched, kinked or
damaged by sharp edges.
• D o not apply force when connecting the USB plugs. A USB plug fits in the USB
socket only on one of its sides.
• A void the following adverse conditions at the location of installation and during
transport:
- dampness or excessive humidity
- extreme cold or heat, direct sunlight
- dust or flammable gases, fumes or solvents
- strong vibrations, impacts or blows
- s trong magnetic fields such as those found in the vicinity of machinery or loud-
speakers
• N ever use the product immediately after it has been taken from a cold room into
a warm one. The condensation that forms can ruin the product under certain
circumstances.
A llow the product to reach room temperature before connecting it to the power
supply and putting it to use. This may take several hours.
• H andle the product with care, it can be damaged by impacts, blows, or accidental
falls, even from a low height.
• D o not leave packaging material carelessly lying around. It may become a dange-
VERSION 03/15
rous plaything for children.
• I f you are not sure about the correct operation or if questions arise which are not
covered by the operating instructions, please do not hesitate to contact our techni-
cal support or another specialist.
NOTES ON RECHARGEABLE BATTERIES
• T he rechargeable battery is permanently installed in the housing of the power
bank and cannot be replaced.
• N ever throw the device into a fire. There is danger of fire or explosion due to the
rechargeable batteries!
• C harge the power bank on a regular basis even if it is not used (approximately
every 3 months). Otherwise, it may result in a deep discharge of the battery, thus
making it permanently unusable.
N o initial discharge is required during charging due to the rechargeable batteries
used.
• D uring charging, place the device on a heat-resistant surface. A slight warming
during the charging process is normal.
• I f your skin comes into contact with leaking or damaged batteries, you may suffer
burns. For this reason you should use suitable protective gloves in this case.
• L iquids leaking from rechargeable batteries are very chemically aggressive.
Objects or surfaces coming into contact with these liquids might be considerably
damaged.
COMMISSIONING
Charge the built-in rechargeable battery completely before each use.
M ake sure that the power rating of your mobile device matches that of the device
(see "Technical Data" chapter).
Always read the operating instructions of your mobile device.
Do not short circuit the USB input/output of the power bank.
a) Checking the charge level of the built-in rechargeable battery
Press the operating button of the power bank briefly to check the charge level of the built-in
rechargeable battery. A running light appears and the power bank checks the battery. Then,
the LEDs indicate the charge level (1 LED illuminated = 25%, 2 LEDs = 50%, 3 LEDs = 75%,
4 LEDs = 100%). A single flashing LED indicates that the charge level is below 25%.
I f no USB device is connected for charging, the power bank switches off automatically
after a few seconds and the blue LEDs are illuminated again.
b) Charging the internal rechargeable battery with the USB power adapter
• First, disconnect the device connected to the charging output of the power bank.
I t is not possible to use the charging output and to charge the power bank at the same
time.
• C onnect the micro USB port to a suitable USB power adapter (e.g. the power adapter that
came with your mobile device/smartphone) using the provided USB cable. It must be able
to supply a current of at least 1 A.
I t is irrelevant which of the two USB-A plugs of the USB-Y cable is used.
• During the charging process, the LEDs indicate the respective charging level.
H ere, the permanently lit LEDs indicate the charging level (1 LED permanently lit = battery
25% charged, 2 LEDs = 50%, 3 LEDs = 75%, 4 LEDs = 100%) and flashing LEDs indicate
the content to be charged.
E xample: 3 LEDs are permanently lit, one LED flashes: The battery is 75% recharged and
the remaining 25% are currently charged.
• T he charging duration is dependant on the charging level of the battery and may be several
hours (for charging duration of a completely flat battery, see chapter "Technical Data").
• O nce the built-in rechargeable battery is fully charged, disconnect the power bank from the
voltage/ current supply. The power bank is now ready for use.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis