Tecsis DC400 Betriebsanleitung Seite 25

Function in normal mode
Key
+
+
Min/Max Memory
The min/max memory is updated with the current measured value in
every measuring cycle.
The min. value is displayed by pressing the min. key.
The max. value is displayed by pressing the max. key.
Pressing and holding the appropriate key (min. or max.) and quickly
pressing the menu key at the same time resets the device to the
current measured value.
Bar Graph with Trailing Pointer Function
The integrated bar graph display with trailing pointer function addi-
tionally indicated on the display shows the trend in current working
pressure directly regardless of the digital display. With the help of the
trailing pointer function, the max. stored value is also indicated in the
bar graph display in addition to the digital display in the form of a bar
segment. This bar segment is also updated to the current measure
value when the min./max. value is reset.
Betriebsanleitung / Operating manual / Instructions de service / Instrucciones de uso
Function/Action
- switches the device on
- switches the device off
- changes to programming mode if pressed
for longer than 3 secs
- display indicated max. value as long as
key is pressed
- display indicates min. value as long as
key is pressed
- resets max. value to
" 0 "
- resets min. value to
" 0 "
GB
25