Tecsis DC400 Betriebsanleitung Seite 20

Copyright
All rights to these operating instructions are reserved. These opera-
ting instructions, including extracts thereof, must not be copied or
translated into other languages without written permission.
Safety instructions and warnings
Please read these instructions before installing and starting up the
digital manometer.
Failure to follow the instructions will make all guarantee, warranty
and compensation claims null and void.
• Please ensure that the digital manometer is suitable for your
application.
• Please check that the materials that come into contact with the
medium are compatible with the media that are going to be
measured.
• Perfect function and operating reliability of the device can only be
guaranteed for the values specified in the technical data sheet.
• Only qualified persons are permitted to install the equipment and
make the electrical connection, and the correct tools must always
be used.
• Damaged devices must not be started up. If damage occurs
during operation, suitable measures must be taken to
prevent persons or property from being put at risk by the damaged
digital manometer.
• The manometer must only be repaired by tecsis.
The accepted technical regulations and all national regulations must
always be observed and complied with.
20 Betriebsanleitung / Operating manual / Instructions de service / Instrucciones de uso
GB