Herunterladen Inhalt Inhalt Diese Seite drucken

Bluetooth ® Playback; Troubleshooting - Renkforce TB378 2.0 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Bluetooth
playback
®
You can wirelessly play back music from a Bluetooth
wireless audio playback A2DP.
If the device additionally supports the AVRCP profile, the playback even can be controlled via the remote control of
the soundbar.
• Start music playback on your mobile device.
• If your mobile device supports AVRCP, the following functions of the remote control are supported:
/PAIR (22) button
/
(21) buttons

13. Troubleshooting

With this soundbar, you have purchased a product built to the state of the art and operationally safe. If you encounter
any problems or interferences nevertheless, the following explanations may help in troubleshooting.
No function
• Ensure that the mains cable is properly connected to the soundbar (as well as the subwoofer, if applicable).
• Check if power is pending at the socket.
• Switch the soundbar from standby mode (operating display (7) lit red) to operating mode.
The remote control does not work.
• The range of the remote control has been exceeded or there are objects between the remote control and the
soundbar that impair signal transfer.
• The remote control was not pointed at the soundbar.
• The battery for the remote control has been inserted with the wrong polarity (+/-).
• The battery of the remote control is flat. Replace the battery.
Interfering noise is audible
• The plugs of the connection cables are contaminated. Clean the plugs with a slightly moistened cloth.
The device does not react to buttons
• The integrated processor must be reset. For this, switch off the soundbar, disconnect it from the power supply for a
few minutes and then take it into operation again.
No sound output
• Check that the desired audio source is on.
• Ensure that the proper audio output is chosen.
• Ensure that the mute function is deactivated and the volume is set high enough.
• Ensure that the sound format at the audio source is set to PCM when you use the digital inputs.
42
device with this soundbar. The playback device must support
®
Playback, pause
Jump to the last/next track

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

1462525Tb378ww 2.11462526

Inhaltsverzeichnis