Renkforce TB378 2.0 Bedienungsanleitung Seite 41

• The soundbar appears in the display of your mobile device with its model name. Select the soundbar to couple
the devices. The soundbar emits the acoustic message "Paired" as confirmation and the operating display (7) is
constantly lit blue.
• Now start music playback on your mobile device again.
Select one of the following options to disconnect the Bluetooth
• Deactivate Bluetooth
tion.
• Switch the soundbar to another audio source (e.g. AUX).
• Keep the /PAIR (22) button pushed for approx. 3 seconds. The soundbar emits the acoustic message "Pairing".
Pairing with NFC function
NFC means Near-Field Communication. Observe that NFC will only work with this soundbar if your mobile device is
equipped with NFC.
• Switch on the soundbar with the
• Push the SOURCE (5) button at the soundbar repeatedly or the BT (19) button at the remote control to switch on
Bluetooth mode. The operating display (7) flashes blue slowly.
®
• Activate NFC at your mobile device.
• Put your mobile device onto the NFC sensor area (3) (see the following figure).
• Your mobile device will vibrate or a corresponding message will be displayed.
• The soundbar emits the acoustic message "Paired" as confirmation and the operating display (7) is constantly lit
blue.
• Now you can remove your mobile device from the NFC sensor area (3) and start audio playback.
• To disconnect your mobile radio device again, put it back onto the NFC sensor area (3). The soundbar emits the
acoustic message "Disconnected" as confirmation and the operating display (7) flashes blue slowly again.
At data transmission via NFC, the cover/protective sleeve of your mobile device must be removed for a
sufficient connection.
on your mobile device. The soundbar will acoustically indicate "Disconnected" as confirma-
®
(6) button at the speakers or the
connection:
®
(17) button on the remote control.
41