English - Grundig PS 4110 Bedienungsanleitung

SAFETY­AND­SET-UP­________________________
Extreme conditions like hot and highly humid
■
environment or improper use of this appliance
may cause the batteries to leak which may
cause personal injury. If the batteries leak, re-
move them with a cloth and dispose of them in
accordance with the applicable laws. Prevent
battery acid from coming into contact with skin
and eyes. If battery acid comes into contact
with your eyes, flush your eyes thoroughly with
plenty of water and consult a physician imme-
diately. If battery acid comes into contact with
your skin, wash the affected area with plenty
of water and soap.
Batteries are very dangerous if swallowed.
■
Please keep the batteries and this appliance
away from children at all times. If a battery is
swallowed, seek medical attention immediate-
ly.
The batteries should never be recharged or
■
reactivated in any way, nor should they be
thrown into a fire. Never allow the batteries to
come in contact with water.
If you do not plan to use the appliance for a
■
long period of time, then remove the batteries.
The appliance can get damaged if they leak.
If your scale does not function properly, re-
■
place all batteries.
Batteries should not be disposed of together
■
with the household waste! Please dispose of
expired batteries in an environmentally friend-
ly way and according to the applicable legal
regulations.
Never use old and new batteries or batteries
■
of differing brands simultaneously.
Before disposing of the appliance, remove the
■
batteries.
When inserting batteries pay attention to the
■
polarity as indicated inside the battery com-
partment. Do not short-circuit the batteries.
The scale switches off automatically after 10
■
seconds once the measurement is complete.
When voltage of battery is down, the "Lo" low
■
battery warning will appear on the display.
Replace the batteries with the new ones.
Caution
The PS 4110 is a product for your well-being.
■
It is not a medical product. No medical recom-
mendations can be made on the basis of its use
or of the results displayed.
Your product is designed with complex algo-
■
rithms. Due to these algorithms, if an external
electromagnetic disturbance happens near
your device, it may affect your readings. In
such cases, first remove the electromagnetic
disturbance reason and repeat your measure-
ment. Under extreme electromagnetic distur-
bance, your device will protect itself and enter
into protection mode. To turn back to normal
running mode, remove and replace the battery
of the product after removing the disturbance.
13

ENGLISH