Front Side Operational Controls; Operation Indicator; Volume Controls - IC Audio AMP 4x120 Bedienungsanleitung

7. Front side operational Controls

7. Front side operational Controls 7. Front side operational Controls 7. Front side operational Controls
CHANNEL 1
CHANNEL 2
CHANNEL 3
CHANNEL 4

7.1 Operation indicator

7.1 Operation indicator 7.1 Operation indicator 7.1 Operation indicator
The green coloured LED indicates that the device is in operating state. The mains power switch is The green coloured LED indicates that the device is in operating state. The mains power switch is The green coloured LED indicates that the device is in operating state. The mains power switch is The green coloured LED indicates that the device is in operating state. The mains power switch is
located on the rear side of the amplifier, to aviod unintentional switching off in security related located on the rear side of the amplifier, to aviod unintentional switching off in security related located on the rear side of the amplifier, to aviod unintentional switching off in security related located on the rear side of the amplifier, to aviod unintentional switching off in security related
systems. systems. systems. systems.
7.2 LED-Volume meter 7.2 LED-Volume meter 7.2 LED-Volume meter 7.2 LED-Volume meter
By this LED-display the output level of the amplifier is shown in the steps -25, -18, -10, -6 and 0 dB. By this LED-display the output level of the amplifier is shown in the steps -25, -18, -10, -6 and 0 dB. By this LED-display the output level of the amplifier is shown in the steps -25, -18, -10, -6 and 0 dB. By this LED-display the output level of the amplifier is shown in the steps -25, -18, -10, -6 and 0 dB.
The 0 dB – LED should not light up permanently, but only momentarily at volume peaks, otherwise The 0 dB – LED should not light up permanently, but only momentarily at volume peaks, otherwise The 0 dB – LED should not light up permanently, but only momentarily at volume peaks, otherwise The 0 dB – LED should not light up permanently, but only momentarily at volume peaks, otherwise
the amplifier shall be overloaded and audio signal distorted. the amplifier shall be overloaded and audio signal distorted. the amplifier shall be overloaded and audio signal distorted. the amplifier shall be overloaded and audio signal distorted.

7.3 Volume controls

7.3 Volume controls 7.3 Volume controls 7.3 Volume controls
By means of the 4 volume controls, sound level can be adjusted separately for each channel by a By means of the 4 volume controls, sound level can be adjusted separately for each channel by a By means of the 4 volume controls, sound level can be adjusted separately for each channel by a By means of the 4 volume controls, sound level can be adjusted separately for each channel by a
screw driver. screw driver. screw driver. screw driver.
AMP 4x120
LED - Volume Meter
Volume controls
EN
6
Operation Indicator
AMP 4x120 POWER AMPLIFIER
VOLUME 1
VOLUME 2
VOLUME 3
VOLUME 4
AMP 4x120
ic audio