Amplicomms TCL 400 Bedienungsanleitung Seite 27

S
ETTING
To set the alarm
1. Press and hold AL SET/SELECT, the
alarm's hour digits flash. Press L or M to set the alarm in
hours (hold L/M to advance rapidly).
2. Press AL SET/SELECT once again, the alarm's minute
digits flash. Press L or M to set the alarm in minutes (hold
L/M to advance rapidly).
3. Press AL SET/SELECT again, LED displays "HI" (vibration
at HI level), press L or M to select "LO" (vibration at Lo
level) if need.
4. Press AL SET/SELECT once again, LED displays "F-1"
and flash, press L or M to select the alarm tone
(frequency).
• F-1 (low tone, 800 Hz)
• F-2 (mid tone, 1 KHz)
• F-3 (high tone, 1.5 KHz)
5. Press AL SET/SELECT once again or no button around 10
seconds to exit the alarm setting mode.
24
/ O
PERATION
Helpline UK 0844 800 6503
(See chapter "Helpline" for costs and hours of operation)
LED and the