Werbung
Verfügbare Sprachen
Verfügbare Sprachen
▲
C A R E A N D C L E A N I N G
B L E N D E R C U P / G R I N D I N G C O N TA I N E R A N D
L I D R E S P. B L A D E B A S E
For safety reasons, the power plug has to be pulled after every use. To prevent the
foods from surface drying to the blades, the blender cup/grinding container or the
lid, we recommend proceeding as follows immediately after every use:
•
Rinse the blender cups/the grinding container, the lids and the blade base with
water to remove most food leftovers.
•
Clean the blender cups/the grinding container, the lids and the blade base
in warm dishwater and with a bottle brush/a soft sponge. After that, rinse with
clear water and dry carefully.
Alternatively, you can pour a little bit of cold water into the blender cup, screw
on the blade base and either blend for 10 seconds with the motor base or shake
it by hand.
Caution: When blending to clean, never fill the blender cup with hot or warm
water. Pressure might develop in the cup. Never add dishwashing liquid to the
water when blending or shaking.
•
Make sure to carefully rinse all detergent remains out of the container, the cups,
the lids resp. the blade base with clear water.
•
Once the blender cup, lid and grinding container resp. the blade base are clean,
dry everything carefully.
•
Note: The blender cup/the grinding container can be cleaned easiest right after
use.
C L E A N I N G I N T H E D I S H W A S H E R
•
The blender cups, the grinding container and the lids as well as the blade base
can be cleaned in the dishwasher in a standard rinsing setting. The parts should
always be washed in the top drawer of the dishwasher.
C L E A N I N G T H E M O T O R B A S E
•
Wipe the motor base clean with a slightly wet, soft towel and dry it afterwards.
Remove potential food remains from the power cord.
60
Werbung
