SOLIS POWER BLENDER TO GO Bedienungsanleitung Seite 46

▲
I M P O R TA N T S A F E T Y P R E C A U T I O N S
Please read through this user manual thoroughly before
using your Solis Power Blender To Go, so that you become
familiar with your appliance and can use it safely. We thor-
oughly recommend that you keep these instructions and, if
you pass the appliance on, that you also hand these instruc-
tions to the new owner.
For your own safety, please observe the following safety
measures when using elec trical appliances:
1. To prevent electric shock, neither the motor base nor the power
cord or plug must come into contact with water or other
liquids. Water can enter the housing and damage the appli-
ance! Should the motor base resp. the power cord or plug
come into contact with liquids, use dry rubber gloves to pull the
power plug from the socket.
2. Do not operate or unplug the appliance with wet or moist
hands or feet.
3. Before using the appliance, check that the voltage stated on the
appliance matches your mains voltage.
4. Place the appliance while in function on a solid, stable, clean,
dry and moisture resistant surface, like a table. Vibration dur-
ing operation may cause the appliance to move. Therefore do
not place the blender near the edge of a bench or table dur-
ing operation. Do not use the appliance outdoors.
5. Do not leave the power cable hanging over table edges so that
it can be pulled. Make sure that it does not come into contact
with hot surfaces, such as hotplates or a radiator, or that it
comes into contact with the appliance. Fully unwind the cord
before use.
6. Keep the appliance away from hot gas, hot ovens and other
heat-emitting appliances or heat sources. Never use the appli-
ance on a hot or wet surface. Never place the appliance near
moisture, heat and naked flames. Keep the appliance away
from moving parts or appliances.
46