Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Power supply
The device is powered by the built-in 3.7V lithium battery. We recommended you to charge the battery for 3 to 5 hours
before initial use. Remember to charge the battery at least once every month.
You can charge the built in 3.7V lithium battery by connecting the device to your computer with the supplied Micro USB
cable. It takes about 3 hours to fully charge an empty battery. You can also use any DC 5V (500 – 2500 mAh) power
adaptor to charge and use the DAZZL.
BT mode
After switching on, the device enters in the BT mode by default and starts scanning automatically.
•
Keep your mobile phone / tablet / other BT device within 3 meters from the DAZZL.
•
Enable BT on your mobile phone and start searching for BT devices (refer to the operating instruction of your mo-
bile phone for details);
•
In the list of the found devices select „DAZZL" and connect;
•
If your mobile phone requires you to enter the password, please enter "0000" and confirm to pair the phone and
the device;
•
Press enter on your phone to exit and make sure your phone is within 10 meters from the device without any barri-
ers between them. Now you can play the music on your mobile phone via the DAZZL.
•
Press Play/Pause or Back/Next to navigate through your music library.
•
During BT playback, when there is an incoming call, you will hear the ring tone in the speaker of the device. At this
time press the Play/Pause button to answer the call. Press the Play/Pause button again to end a call and return to
music playback mode. To decline any incoming call, press and hold Play/Pause for more than 3 seconds.
AUX IN mode:
When the device is powered on, if you connect a 3.5mm AUX audio cable to the AUX IN port on the device, it will switch
to AUX IN mode. Connect the audio cable of the external audio source such as an MP3/CD player to the AUX IN port of
Power on/off
1
DC 5 V - Adaptor input jack
2
AUX-IN (3,5mm input jack for connecting exter-
3
nal audio players like MP3 or cd players)
Battery LED (red when charging)
4
Function LED (blue= BT indicator; green= AUX)
5
Operation
7
Werbung
Inhaltsverzeichnis
