DJI matrice 600 pro Bedienungsanleitung Seite 12

3. Some No Fly Zones are comprised of several zones. Each zone
features circles of various sizes. The aircraft will NOT be able
to take off in the inner most zone of the No Fly Zone, and will
descend to the specified altitude when it approaches the edge of
the inner most zone. Ground station functionality is disabled when
the aircraft is within a No Fly Zone.
4. Users are NOT able to set up waypoints within No Fly Zones.
Altitude Limit
1. Fly NO higher than 120 meters (400 feet) above ground level and
stay away from any surrounding obstacles.
2. If you intend to fly above the default altitude limit, you are required
to accept the prompted disclaimer to enable the new altitude limit.
If a new altitude limit is set, you further understand and agree that
data including but not limited to flight telemetry data and altitude
limit changes could be uploaded to and maintained on a DJI-
designated server.
This content is subject to change.
Download the latest version from
http://www.dji.com/matrice600-pro
If you have any questions about this document, please contact
DJI by sending a message to DocSupport@dji.com.
MATRICE is a trademark of DJI.
Copyright © 2017 DJI All Rights Reserved.