Braun JUMPER II Bedienungsanleitung Seite 24

Taking a Still Image
1. Turn the camcorder on and press the MODE button to set
the camcorder to capture mode.
2. View your subject on the LCD display and press the
SHUTTER button to take a still image.
3. After the image has been taken the LCD will display the
image for a brief moment.
4. The memory capacity in the right corner of the screen will
decrease with each image captured.
Capture Mode Menu
1: Turn the camcorder on.
2: Press the MODE button to enter the menu in capture
mode.
3: Press and hold the MODE button to view the menus.
4: Press the SHUTTER button to select the desired menu.
5: Press the MODE button to view the selected submenu.
6: Press the SHUTTER button to confirm and exit the menu.
Capture mode menu:
MENU
Resolution
FUNCTION
Set the image resolution for still photos:
8