Braun JUMPER II Bedienungsanleitung Seite 22

3: Select one of the three connectors, and attach it to
connector 3.
4: Attach connector 2 with the screw to the connector.
5: Attach the tripod connector of the mount to the
camcorder's tripod connector.
6: Adjust the screws to align the camcorder.
7: After attaching the camcorder to the mount, use a strap
to attach it to the helmet.
Insert a strap into the two ends of mount b). Adjust the length
according to the helmet's size and tie the strap around your
helmet.
OR
OR
6