Braun JUMPER II Bedienungsanleitung Seite 19

Charging the Battery
The camcorder comes with a built-in rechargeable lithium
battery; please charge before use.
1: Turn the camcorder off.
2: Connect the supplied USB cable to the camcorder and
the computer.
3: When charging, the status LED will turn red.
4: Once fully charged the status LED will turn off. Unplug the
USB cable.
The camcorder casing can become warm after extended
use. This is normal.
Inserting the Memory Card
This camcorder is not equipped with an internal memory. A
microSD card (at least class 4) must be inserted in the
sportive camcorder to operate. The camcorder cannot
record if no card is inserted.
1: Turn the camcorder off.
2: Find the microSD card slot at the side of the camcorder
and insert the memory card.
3