Lamb LABA-WDMO-0814 Betriebsanleitung Seite 19

www.weg.net
1. Ensure that all eyebolts are tightened properly, as shown in Figure 4.1;
2. Install the first pair of eyebolts and lift the motor as shown in Figure 4.16;
Figure 4.16 - Install the first pair of eyebolts
3. Install the second pair of eyebolts, as shown in Figure 4.17;
Figure 4.17 - Install the second pair of eyebolts
4. Reduce the load on the first pair of eyebolts for rotating the motor, as shown in Figure 4.18. This procedure
must be carried out slowly and carefully;
Figure 4.18 - Motor is being rotated to horizontal position
5. Remove the first pair of eyebolts, as shown in Figure 4.19.
Figure 4.19 - Final result: motor placed in horizontal position
72 Manual of Electric Motors