Velleman CAMCOLVC17 Bedienungsanleitung Seite 6

Note: do not switch the camera off while recording: your video file
will not be saved on the memory card.
Using the photo function
1. Switch the camera on.
2. Set the mode switch [4] to Photo.
3. Press the record button [8] to initialise the camera.
The LED lights blue during initialisation. When the camera is
ready, the LED flashes orange.
4. To take a photo, briefly press the record button [8].
The camera saves the photo on the memory card. The blue LED
lights while the photo is taken and saved.
5. Wait until the LED flashes orange before you take the next
photo.
Connecting to a pc
1. Switch the camera off.
2. Plug one end of the included USB cable into the USB jack [6].
3. Plug the other end into a USB port on your computer.
4. On the pc, open My Computer and look for the drive that
represents the camera.
The photos are in the IMAGE folder; the recorded video files are in
the VIDEO folder. You can copy, delete, or view the files from here.
Note: to disconnect the camera from the pc, use Windows' Safely
Remove Hardware function to stop the device before you unplug
the USB cable.
Setting the camera time
Setting the camera date and time ensures that your photos and
video have a correct time stamp.
1. Make sure there is a micro SD card in the camera.
2. Switch the camera on.
3. Connect the camera to your computer with the included USB
cable.
4. Insert the included CD in your computer's CD drive.
5. Locate and double-click the WriteTime.exe file on the CD-ROM.
The screen below appears:
V. 01 – 13/07/2012
CAMCOLVC17
6 ©Velleman nv