MBL 9007 Bedienungsanleitung Seite 10

2.3 b) Connecting power amplifiers to speakers in mono mode, bi-wiring
Note the imprint MONO on the back of the power amplifier.
If you want to connect two power amplifiers to your loudspeakers in bi-wiring mode, use the MONO connectors of the power
amplifiers. Connect each loudspeaker to one power amplifier. Connect the plus terminals (WOOFER and SYSTEM) to the respec-
tive plus connectors and the minus terminals to the minus connectors.
left speaker
WOOFER
terminals
mono power amplifier
mbl 9011 | mbl 9008 A | mbl 9007
Example with mbl 101 E MKII Radialstrahler
S Y S T E M
terminals
left
WOOFER
terminals
9
right speaker
mono power amplifier
right
S Y S T E M
terminals