Kingstone Atlanta 650 Bedienungsanleitung Seite 14

ATLANTA 650 BDA 23.11.16 16:13 Seite 14
Electric energy
Products used in 4 x 1.5 V batteries to light the LED, use the 1 x 1.5 V battery to start the infrared side and rear burner.
Battery type: AA 1.5 V for the LED light, AAA 1.5 V for the infrared side and rear burner.
Remarks: Some models have lights, some with no lights and infrared side and rear burner.
Replacing the igniter Battery
If igniters stop sparking, the battery should be replaced.
A. Change the led battery
1.Find the battery box open the lid.
2. Put 4pcs "AA" size battery, the positive and negative pole of the battery should keep the same as the pole in box.
3.Close the lid.
Change main burner
1. First, find out which main burner has been broken, if it's not the far left one (if it's the far left one, just remove the broken
one), remove from the far right burner, take out the circlip, take out the main burner, remove the transmission frame; If the
machine do not have transmission frame (like American version), just remove the main burner, no need to take step 2.
2. repeat step 1, from right side to left side to remove main burner and transmission frame, until remove the broken one.
3.Change the bad main burner, from left to right by turn to set up main burner and transmission frame (if do not have
transmission frame, just change the main burner directly), use circlip to set.
14