Repeating A Track; Programming Tracks; Random Playback - Watson Rp5900 Bedienungsanleitung

6.4 repeating a track
The repeat function allows repeated playback of a track or the entire content of a disc during normal
playback or programmed playback. Press rEpEAT/prOG. (4) to activate one of the following
functions.
Key action
1 x
2 x
3 x
6.5 programming tracks
You can program up to 20 tracks of a CD for playback in a certain sequence.
In stop mode (the total number of tracks on the CD is displayed), press the rEpEAT/prOG. (4)
button. "01" flashes on the display (to show the position in the playlist) and the programme indicator
prOG. (7) under the display flashes as well. The device returns into stop mode if you take too much
time with selecting.
Now press the SKIp up (3) or SKIp DN (10) button once or several times until the desired track
number, which is to be played first, is displayed.
Confirm your selection by pressing the rEpEAT/prOG. (4) button.
"02" flashes on the display (to show the position in the playlist) and the programme indicator prOG.
(7) under the display flashes as well.
Now press the SKIp up (3) or SKIp DN (10) button once or several times until the desired track
number, which is to be played next, is displayed.
Repeat the above steps until all desired tracks on the CD are programmed or until the programme
memory is full. You can also program a track more than once.
Press the rEpEAT/prOG. (4) button again to display the sequence of your programme.
Press the pLAy/pAuSE (2) button to start your programme playback.
To pause the programme, press the pLAy/pAuSE (2) button once. Continue programme playback
by pressing the pLAy/pAuSE (2) button again.
End and delete the programme by pressing the STOp (11) button twice. The programme indicator
prOG. (7) under the display turns off.
6.6 random playback
In stop mode (the total number of tracks on the CD is displayed) or in playback mode press the
rANDOm (9) button.
Playback starts with a randomly selected track; the display shows alternating rotating bars (random
indicator) and the track number.
All tracks on the CD are played once in random order, then playback stops.
During random playback also the SKIp up (3) and SKIp DN (10) buttons are available to skip a
track forward or back.
LED display
10
Function
Repeat a track.
Repeat the entire disc.
Repeat function cancelled.