Playing A Disc; Searching A Track - Watson Rp5900 Bedienungsanleitung

6.2 playing a disc
Close the disc compartment lid (17).
The total number of tracks, e.g. , appears on the LED display (1) once the disc
has been loaded after
Press pLAy/pAuSE (2) to start playback. Play starts with the first track.
Press pLAy/pAuSE (2) to pause playback. The playback indicator flashes
(Ill.
Press pLAy/pAuSE (2) to again to resume playback.
Press STOp (11) to stop the playback. The total number of tracks on the disc is
displayed.
Press pLAy/pAuSE (2) to cancel STOP mode and start playback from the
beginning of the first track.
6.3 Searching a track
During playback: Tracks can be searched using the SKIp up (3) or SKIp DN (10) button.
Button
SKIp up (3)
SKIp DN (10)
SKIp up (3)or
SKIp DN (10)
SKIp up (3)or
SKIp DN (10)
In stop mode: Press the STOp (11) button. The total number of the tracks on the CD is displayed.
The SKIp up (3) or SKIp DN (10) buttons can be used to skip between tracks as well. Press pLAy/
pAuSE (2) button to start playback after the desired track is selected.
Button
SKIp up (3)or
SKIp DN (10)
flashes for a few seconds.
).
press button
1x
1x
2x
Several times
Press and hold
press button
Several times
Press and hold
Description
Skip to the beginning of the next track.
Skip to the beginning of the current track.
Skip to the beginning of the previous track.
Press until the desired track number is shown on the
LED display (1). The playback starts playing the chosen
track.
Press and hold to fast forward/backward in order to
find a particular position within a track. Let go when
you reach the desired position. Playback will now
continue from this position.
Description
Skip backward/forward by 1 track at a time.
Fast backward/forward to search for a track.
9
Playback indicator