Worx Landroid M Installationsanleitung Seite 11

2. Pegging your boundary wire
When pegging the boundary wire for the first time, it is recommended to use a normal lawn mower or a grass
trimmer to cut the grass along the boundary. Then the wire can be laid as close as possible to the ground to prevent
the Landroid M accidentally cutting the wire. The boundary wire is powered with a very low voltage so that it is totally
®
safe to people beings and pets.
80cm
80cm
NOTE: Keep the boundary wire straight and tight between the pegs,
there should be no slack wire between the pegs.
2.1
When laying the boundary
wire, use the distance gauge
to keep a 35cm* space
between the wire and the
boundary.
Each wire peg should be
placed around 80cm apart.
Use the provided distance
gauge to ensure proper
installation.
11
EN