Herunterladen Inhalt Inhalt Diese Seite drucken

Side By Side; Changing The Door Handle; Bail Handles; Angular Handles - Siemens tg 11101 Montageanleitung

Inhaltsverzeichnis

Werbung

Please fold out the illustrated last page.
These installation instructions refer
to several models.
The illustrations may differ.

Side by Side

Observe position of the
appliances
(not all models)
The side panel of the refrigerator is heated
slightly for a side by side arrangement.
This prevents the formation of
condensation when the appliances are
placed together.
Therefore, always place the refrigerator
on the left side for a side by side
arrangement.
Changing the door
handle
(If required)
Lever handles
Figure 1 or Figure 2 (depending on
model)
Installation in numerical sequence.
Attention! Carefully place the appliance
on its back.

Bail handles

Figure 3
Installation in numerical sequence.
S 1 Unscrew the handle on the left side.
S Use a screwdriver to lift the plug 2
opposite the door handle.
S Push the handle all the way in the
direction of the arrow 3.
S Carefully pull the handle in the direction
of the arrow 4, the handle disengages
from the centre attachment.
S Reposition the handle and re insert into
the centre attachment 5.
S Push the handle all the way in the
direction of the arrow 6.
S Screw the handle 7 on the right side.
S Insert the caps opposite 8.

Angular handles

Figure 4
Installation in numerical sequence.
de
en
7

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis