Saeco Easy Bedienungsanleitung Seite 29

PROBLEMS CAUSES
The machine does not The machine is not
turn on. connected to the power
supply.
The coffee is not hot The cups are cold.
enough.
The machine does not Knob positioned on too
brew coffee. low a setting
No hot water or steam is The tube nozzle is clog-
dispensed. ged.
A noise can be heard
coming from the steam
tube of the machine.
The machine takes a long Excessive
time to warm up. built up.
The brew unit cannot be The unit has stopped in
removed. the wrong position.
REMEDIES
Move the main switch to ON.
Check the plug and the
connection
Warm up the cups.
Turn the knob clockwise to a
higher setting.
Clean the nozzle opening with
a needle.
During this operation,
the knob must be
closed and the machine
must be off.
scale has Descale the machine.
Close the door and switch on
the machine; the brew unit will
move back into position.
PROBLEMS - CAUSES - REMEDIES
PROBLEMS CAUSES
Coffee fl ows out in slow Excessively fi ne grind
trickle or not at all.
and too much coffee.
29
REMEDIES
Adjust to a coarser grind (turn
the knob clockwise).
Decrease the quantity.