Switching On; Switching Off; Preparing The Coffee; Flavour - Clatronic KA-V 3002 Bedienungsanleitung

Preparing the coffee

Switching on

Fig. 4
READY TO
B RE W C OFF EE

Switching off

Flavour

Types of preparation

Self-cleaning function

MACHINE IS
RINSING
42
Before switching it on each time, check whether there is enough
water in the water tank. The machine does not work if there is too
little water in the tank.
Switch the machine on at the on/off switch (Fig. 4/1).
1
The machine now carries out a self-test. At the same time, any
existing residual water is rinsed from the machine.
The machine is ready to start when the message "Ready to brew
coffee" appears in the display.
Switch the machine off at the on/off switch (Fig. 4/1).
NOTE:
If the machine is not operated for a longer period of time, empty
and clean the water tank, the drip tray and the coffee dregs box.
Clean the brew unit.
Preparing the coffee
The flavour of your coffee depends on various factors, like for
example the grinding level, the coffee roast, etc.
For this reason, try out different types of coffee. The degrees of
roasting and therefore also the flavour are very different. Change the
grinding level. Use soft water. Vary the filling height of the cups.
For the best results, we recommend an espresso roast.
You can choose between two different types of preparation. You can
prepare coffee from beans or from fresh coffee powder.
You usually achieve the best flavour by preparing coffee from beans.
In spite of that, it is useful to be able to prepare coffee from fresh
coffee powder, particularly if you want to drink a different type of
coffee (e.g. decaffinated coffee).
The machine automatically self-cleans after preparing 10 cups.
You will see the message "Machine is rinsing".
If necessary, empty the drip tray and the coffee dregs box.