Programme Edit; Signal Information; Cl Information; Power-Off-No-Signal-Down - Seg Calgary Bedienungsanleitung

PROGRAMME EDIT

navigate through the menu
Delete
Press the RED button to delete the highlighted channel, a
Move
Press to select the channel, press yellow button to
enter the move mode, then press
Skip
Press to select the channel you wish to skip.
channel name and the channel will be skipped when you
scroll through the channels.
main menu.
Rename (Only available in ATV)
Modify current channel name.
Press the button to enter RENAME mode, then use
the buttons to change name. Press the green

Signal Information

channel /network/modulation/quality /strength.
18
Calgary 58 cm (23") LED BLU-TV

Cl Information

channels is not possible.
Power-O -No-Signal-Down
If no valid input signal is detected, the TV set will toggle to

Auto-Power-Down

the last channel switching, the TV set will automatically
toggle from On to standby mode. Prior to this automatic
toggling, a message will be displayed allowing you to
Guide (EPG – Electronic Program Guide)
the Electronic Program Guide. EPG contains a 7-day
programme preview as long as the selected channel
supports this function. If there is more information about
a programme, press the
to move the chan-
able number of characters is limited.

Favourite Lists

ton to add it to the list of favourite channels. To remove a
channel from the favourite list, select the desired channel
create an own favourite list for each tuner module.

Dish Setup

3. If you have a motorised Dish with a DiSEqC rotator
4. If you are on a DiSEqC switch system you will need
long as you know what satellite your dish is aligned with
Installation of 3 & 4 require an experienced user or
engineer.
M
section.
or with a di erent LNB you will need to use this sec-
tion.
and wish t o tune more than one satellite you will need
this section.
this section.
-
and m buttons to scroll
-
-