Prevention Of Damage - Beem Kingmop-Superclass Z4.001 Bedienungsanleitung

Prevention of damage

CAUTION
Damage is possible from improper use of the device!
Observe the following instructions to avoid damage:
Before connecting the device, compare the connection
►
data (voltage and frequency) on the rating plate with those
of your mains power supply. The data must correspond in
order to avoid damage to the device. If in doubt, ask your
electrical device retailer.
Never immerse the device into water or other liquids.
►
Always carry the device with the handle and not the connec-
►
ting cable.
Do not pull the mains cable to remove the plug from the
►
mains socket.
Do not crush the connecting cable. (e.g., under doors).
►
Do not expose the connection cable or the device to heat or
►
chemical liquids.
Do not pull the connecting lead across sharp edges or hot
►
surfaces.
Operate the device only when the tank is filled.
►
Pour only water and no other fluids or additives into the
►
tank.
Observe the maximum filling level of the tank.
►
Do not leave the device outside and do not expose it to di-
►
rect sunlight or humidity. Do not store the appliance in direct
vicinity of heat sources (such as fire, radiators, fan heaters
or other heat radiating devices).
BEEM - Elements of Lifestyle
Safety
EN
37