Maintenance - Novy 894 Montageanleitung Und Bedienungsanleitung

Maintenance

Maintenance of the grease filter
The hood contains one metal filter which should
be cleaned twice a month.
Access to the filter
Take hold of the right and left side of the plate (a)
and pull down simultaneously.
Remove the filter (b) by taking hold of its hook and
pulling down.
Cleaning the filter:
• in the dishwasher
• manually: in a hot solution of water and a
liquid detergent. Rince and allow to dry com-
pletely
Important! The previous instructions need to
be followed. If not an increased fire hazard may
occur.
Maintenance of the hood
Please allow the lights to cool down sufficiently
before cleaning the hood.
Use a soft, wet cloth and a mild detergent to clean
the hood.
Never use aggressive, abrasive detergents or
sponges. Bleach will damage stainless steel.
The stainless steel surfaces can be treated with
Novy Inoxcleaner (906.060) after cleaning.
Replacement of the fluorescent lighting
Remove first the electrical plug from the electrical
point.
Remove the (onderplaat)
• Open the cover plate (A) by pulling it down.
• Remove the cover plate (A) by converting the
adjusting clips (B). Don't loosen the screws
completely!
• Click the cover plate (A) loose with a light
descending push.
• When you want to replace the cover plate (A)
don't forget to replace the adjusting clips over
the plugs and to tighten the screws.
Remove the grease filter
• Remove the grease filter to get acces to
the screws witch hold the glass panels (see
maintenance).
Remove the glass panels
• Loosen First the screws before you remove the
glass panels (A).
• Tip the glass panel (A) over the filterholder (B)
• Watch out: Support the glass panel with the
integrated command, so the cable (C) that lies
underneath doens't get damaged.
Cleaning the glass panels and cover plate
• Don't put the panels and the cover plate in the
dishwasher and don't plunge them in water
completely.
• Keep the control dry while cleaning the glass
panel.
EN 16