Honeywell HRD 80 Bedienungsanleitung Seite 28

Button assignment
3. Activating binding at Hometronic Manager HCM 200D
In the following example, button 1 is assigned to illumination.
Press the Input button.
►
The following is displayed:
If you assign a button a lifestyle at a
►
later point in time, turn the Input button
further until the following is displayed:
Select "Devices/Lights" and press the
►
Input button.
The device names appear in the dis-
play, e.g.:
Select device name (e.g. "Illumina-
►
tion") and press the Input button.
The red LED
luminates brightly.
The Hometronic Manager is now ready for data transfer for approx.
8 minutes. The red LED on the HCM 200D then goes out again.
26
for manual mode il-
HEATING/COOLING
SHUTTER
DEVICES/LIGHTS
SENSOR
DEVICE/LIGHT
SENSOR
BOILER DEMAND
LIFESTYLE
ILLUMINATION
MODE-2
MODE-3
MODE-4
ILLUMINATION
MODE-2
MODE-3
MODE-4
*
*