Functional Description - Bosch GWB 10 RE Professional Originalbetriebsanleitung

OBJ_BUCH-493-001.book Page 13 Monday, September 10, 2007 1:50 PM
Keep your workplace clean. Blends of mate-
rials are particularly dangerous. Dust from
light alloys can burn or explode.
Always wait until the machine has come to a
complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Never use the machine with a damaged ca-
ble. Do not touch the damaged cable and pull
the mains plug when the cable is damaged
while working. Damaged cables increase the
risk of an electric shock.

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
Intended Use
The machine is intended for drilling in wood,
metal, ceramic and plastic, especially at hard to
reach locations. Machines with electronic speed
control and right/left rotation are also suitable
for screwdriving and thread tapping.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Rotational direction switch
2 Thumbwheel for speed preselection
3 Chuck key
4 On/Off switch
5 Key type drill chuck
The accessories illustrated or described are not includ-
ed as standard delivery.
Bosch Power Tools
Technical Data
Angle Drill
Article number
Rated power input
No-load speed
Rated speed
Rated torque
Chuck clamping range
Max. drilling dia.
– Steel
– Aluminium
– Wood
Weight according to
EPTA-Procedure
01/2003
Protection class
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Declaration of Conformity
We declare under our sole responsibility that the
product described under "Technical Data" is in
conformity with the following standards or
standardization documents: EN 60745 according
to the provisions of the directives 2004/108/EC,
98/37/EC (until Dec. 28, 2009), 2006/42/EC
(from Dec. 29, 2009 on).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider Dr. Eckerhard Strötgen
Senior Vice President Head of Product
Engineering Certification
23.07.2007, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
English | 13
GWB 10 RE
Professional
0 601 132 7..
W 400
rpm 0 – 1100
0 – 750
rpm
Nm 2.2
mm 10
mm 10
mm 12
mm 22
kg 1.6
/ II
1 609 929 M44 | (10.9.07)