DMX Operation
Making the DMX Connection – Connect the machine to a DMX controller or to one of the
machines in the DMX chain. The machine uses 5-pin XLR connector for DMX connection.
DMX Channel Function
Channel Mode
1
Service and Maintenance
Do not allow the machine to become contaminated.
․
Remove dust from air vents with air compressor, vacuum or a soft brush.
․
Excessive dust, liquid and dirt built up will degrade performance and cause
․
overheating.
Fuse Replacement
Disconnect AC power before replacing fuse. Only replace fuse with same type
and rating.
Step 1: Disconnect power cord from supply.
Step 2: Use a flat-head screwdriver to release fuse holder.
Step 3: Replace fuse with exact same type and rating as indicated below.
Step 4: Reinsert fuse holder.
Fuse
120V = T1.6A 250V
240V = T0.8A 250V
Channel
1
10
Value
Function
0-5
Off
6-255
Fan 20-100%