Panasonic KX-TGP600 Schnellstartanleitung Seite 11

KX-A406
Registering to the base unit of KX-TGP600
1. KX-TGP600:
a. /
b. [D]/[C]/[F]/[E]:
c. [D]/[C]: "System Settings"®
d. [D]/[C]: "Repeater Mode"®
e. [D]/[C]: "On"®
2. KX-A406:
Connect the AC adaptor to the repeater.
3. KX-TGP600:
Press and hold the handset locator button
for about 4 seconds until the indicator
flashes red.
4. KX-A406:
Connect the AC adaptor to an AC outlet.
R Wait until the 2 indicators light green.
(The unit is ready for use.)
R If the indicators do not light green, refer
to the Installation Manual of the repeater.
5. KX-TGP600:
Press the handset locator button of the
base unit to exit registration mode.
Registering to the Panasonic Digital Cordless Phone (except for North
America)
For details, refer to the Operating Instructions.
Registering to the base unit of KX-TGP500/KX-TGP550 (except for North
America)
For details, refer to the Installation Manual of the repeater.
®
Setup
3