Siemens TE806 serie Gebrauchsanleitung Seite 38

en Controls
j button and settings
j
Use the button 7 to display information
(press briefly) and adjust settings (hold
down for at least 3 seconds).
Displaying information
The following information can be displayed
in the Info menu:
■ when should the next service be
completed.
■ how many drinks have been dispensed
since the espresso machine was
switched on.
j
■ Press the button 7 briefly and navigate
< >
with the and
Info
Descale after.
Clean after
Change filter in
Info
No. of coffees
No. of milk mixes
Amount hot water
* appears only if the filter is activated.
j
Press the button 7 briefly to return to the
drink selection. If no button is pressed for
about 10 seconds, the appliance automati-
cally switches back to drink selection mode.
Adjusting settings
See "Menu settings".
34
buttons 4.
À
200
200 À
*
À
200
11
15
2l
Adjusting the grinding unit
The rotary selector 17 adjusts the grind
settings from coarse to fine.
W Warning!
Adjust the grinding unit only while it is
running! Otherwise the appliance may be
damaged. Do not reach into the grinding
unit.
■ While the grinding unit is running,
adjust the rotary selector 17 from
fine (a: Turn anticlockwise) to coarse
(b: Turn clockwise).
a
Info: The new setting will not become
apparent until after the second cup of
coffee.
Note: If the message
grinding unit to coarser setting!
appears in the display, the grind setting
for the coffee beans is too fine. Adjust the
grinding unit to a coarser setting.
Tip: For dark roast coffee beans, choose a
finer grind; for lighter beans a coarser grind.
Cup warming function
(depending on the model)
W Warning!
The cup warmer 27 gets very hot.
The fully automatic espresso machine has
a cup warmer 27 that can be switched on or
off manually with button 28. When the cup
warmer 27 is on, button 28 lights up.
Tip: For optimal cup warming, place the
base of the cups on the cup warmer 27.
b
Please adjust