D-Link DUB-H4 Installationsanleitung Seite 5

FAST-CHARGE MODE
CHANGING FROM STANDARD MODE TO FAST-CHARGE MODE
• Standard Mode: When the DUB-H4 is connected to a computer that is powered on, the
DUB-H4 will enter Standard Mode. In this mode, a connected iPad may display a "Not
Charging" status, and will charge its battery very slowly. If the power adapter is not connected
to the DUB-H4, the hub will draw power from your PC's USB port, affecting the speed and
ability of your iPad to charge its battery.
• Fast-Charge Mode: When the DUB-H4 is not connected to a computer or is connected to a
computer that is powered off or in standby/sleep mode, all USB ports will supply additional
power to effectively and quickly charge an iPad. Please note that in order to use Fast-
Charge Mode, the DUB-H4 must also be connected to the power adapter, and the LED on
the hub must be lit green to indicate it is receiving power.
Notes:
1. We suggest the total combined power draw of 4 ports does not exceed 10 W or 2 A.
2. The actual charge capacity provided is dependent on attached device needs.
3. The iPad_Charge.exe program is only available for Windows OS.
®
iPAD SYNC
CHARGING AND SYNCING YOUR IPAD AT THE SAME TIME
For iPad models with a 30-pin port, if you want to charge and sync your iPad simultaneously
when it is connected via the DUB-H4 to a Windows computer, go to the Product Support
page for the DUB-H4 on www.dlink.com and download the iPad_Charge.exe program
onto your computer. Once you've installed this program, you'll be able to sync and charge
your iPad simultaneously.
®
Note: iPad is a registered trademark of Apple Inc.
DUB-H4
5