Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. Operation
1.
Turn on the device using the power switch (4).
2.
Set the desired output voltage with the voltage adjustor (11). The output voltage is shown in
the LED display (1) and always refers to the positive and negative range. If 15V is display,
you can use +15V between the "Plus" socket and the zero-socket. Between zero and "Minus"
socket can -15V be used and between the "minus" and "plus" socket without zero 30V
(Picture):
-10-
Werbung
Inhaltsverzeichnis
