Specifications - Eufab 16505 Bedienungsanleitung

GB Battery maintenance device 12V 500mA
Article No. 16505
Overview
• Proper use of the product • Scope of delivery • Specifications • Safety notes
• Operating instructions • Care and maintenance • Contact information
WARNING
Read the operating instructions through carefully prior to initial use and observe all of
the safety notes! Not observing such may lead to personal injury, damages to the device
or your property! Store the original packaging, the receipt and these instructions so that
they may be consulted at a later date! When passing on the product, please include these operating
instructions as well.
Please check the contents of package for integrity and completeness prior to use!
Proper use of the product
The battery maintenance device is designed to ensure that the vehicle battery remains fully charged when the
vehicle is not used for a longer period of time. The battery maintenance devices is suitable for the following
lead-acid batteries:
• Wet batteries (WET), lead-acid batteries (fluid electrolyte)
• Gel batteries (gel electrolyte)
• AGM batteries (electrolyte in fibreglass fleece)
• Maintenance-free lead-acid batteries (MF)
Other batteries may not be charged with this device.
The battery maintenance device may not be used as jump-start assistance. First charge the battery of the vehicle
completely and remove the charger before starting the vehicle.
The battery maintenance device may not be used as direct current source or for other purposes.
The battery maintenance device is designed for use in a protected environment at temperatures of -15 °C to +40°C.
This device is not designed to be used by children and people with limited mental capacities or those without
experience and/or knowledge. Keep children away from the device.
The device is not designated for commercial use.
Utilisation according to the intended purpose also includes the observance of all information in these operating
instructions, particularly the observance of the safety instructions. Any other utilisation is considered to be contrary
to the intended purpose and may lead to material damages or personal injuries. EAL GmbH assumes no liability for
damage resulting from improper use.
Scope of delivery
Battery maintenance device

Specifications

Battery voltage:
Battery capacity:
Charge current:
Input:
Output:
Long mains cable:
Long charger cable:
Weight:
4
Operating instructions
12 V
5 – 50 Ah
500 mA
230 Volt AC, 50 Hz, 14 W
12 Volt DC, 500 mA
Approximately 1.05 m
Approximately 0.94 m
0.330 kg