Renkforce AdventureWheel1 Bedienungsanleitung Seite 3

Operating instructions
Bluetooth speaker "AdventureWheel1"
®
Item no. 1576985
Intended use
This product is designed to play audio from a connected Bluetooth
a 5 V lithium-ion rechargeable battery and features a 3.5 mm jack input, which allows you to
play music from devices with an analogue auxiliary output. You can also use the speaker to
answer calls from a connected mobile device. The product is splashproof when the rubber seal
is closed (IPX4).
For safety and approval purposes, you must not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product. In addition,
improper use can cause hazards such as a short circuit, fire or electric shock. Read the
instructions carefully and store them in a safe place. Make this product available to third parties
only together with its operating instructions.
This product complies with statutory national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.
Bluetooth is a registered trademark of Bluetooth SIG, Inc. worldwide.
®
Delivery content
• Bluetooth speaker
®
• 3.5 mm jack cable
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
on this page. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle indicates that there is a risk to your
health, e.g. due to an electric shock.
This symbol is used to highlight important information in these operating instructions.
Always read this information carefully.
This symbol indicates special information and advice on how to use the product.
Safety information
Read the operating instructions and safety information carefully. If you do
not follow the safety instructions and information on proper handling in this
manual, we will assume no liability for any resulting personal injury or damage
to property. Such cases will invalidate the warranty/guarantee.
a) General information
• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly, as it may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorized use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height
may damage the product.
• Always observe the safety and operating instructions of any other devices which
are connected to the product.
• Consult a technician if you are not sure how to use or connect the product.
• Maintenance, modifications and repairs must be done by a technician or an
authorized repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Rechargeable battery
• The rechargeable battery is built into the product and cannot be replaced.
• Never damage the rechargeable battery. Damaging the casing of rechargeable
batteries may cause an explosion or a fire!
• Never short-circuit the contacts of the rechargeable battery. Do not throw the
battery or the product into open flames. This may cause a fire or explosion!
device. It is powered by
®
• Charging cable
• Operating instructions
• Charge the battery regularly, even when you are not using the product. You do not
need to discharge the battery before recharging it.
• Never leave the battery unattended when it is charging.
• Place the product on a heat-resistant surface before charging the battery. The
product may become warm when the battery is charging.
c) Persons and product
• Never pour any liquids over electrical devices or place objects filled with liquid next
to the product. If liquid or an object does enter the interior of the device, power
down the respective socket (e.g. switch off the circuit breaker), and then remove
the mains plug from the mains socket. Discontinue use and take the product to a
specialist repair centre.
• Never use the product immediately after it has been brought from a cold room
into a warm one. The condensation generated may destroy the product. Allow the
product to reach room temperature before connecting it and putting it to use. This
may take several hours.
• When setting up the product, make sure that the cables are not pinched, kinked
or damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them.
This may cause an injury.
• Do not listen to loud music for long periods of time, as this may cause hearing
damage.
Product overview
9
8
7
6
5
Operation
a) Charging the internal battery
You can use the speaker when it is charging. However, to prolong the lifespan of the
product, we recommend that you wait until the battery is fully charged before using
the speaker.
• Fully charge the battery before using the speaker for the first time.
• Recharge the battery when the speaker plays a low battery warning. The LED status
indicator (7) will flash from time to time and the speaker will switch off soon.
To charge the battery, follow the steps below:
• Open the rubber seal that covers parts 1,2 and 3.
• Connect the micro USB connector to the micro USB port (3) on the speaker.
• Connect the USB-A connector on the micro USB cable to a USB power source (e.g. USB
power adapter). Charging will start automatically when the USB power source delivers a
current. Plug the USB power adapter into a mains socket.
• The LED indicator (2) will turn red to indicate that the battery is charging. The LED indicator (2)
will turn off when the battery is fully charged.
• Unplug the power adapter from the mains. Disconnect the product from the USB power
adapter (or other USB power source).
b) Turning the speaker on/off
• Press the multifunction button (8) for 3 seconds.to turn on the speaker. The LED indicator (7)
flashes when the speaker is in pairing mode and stays constant when a Bluetooth
connected. The speaker will play a notification tone to indicate that it is turned on.
• The speaker will automatically search for available Bluetooth
• To turn off the speaker, press the multifunction button (8) for 3–5 seconds. The LED indicator
(7) will turn off, and the speaker will play a notification tone to indicate that it is switching off.
1 3.5 mm analogue jack input
2 LED charging indicator
3 Micro USB port
4 Handle
5 Volume -
6 Volume +
7 LED status indicator
8 Multifunction key
9 Microphone
4
3
2
1
devices.
®
device is
®